Cookie Img
National Analytical Corporation
Home » Products » Intrinsic Dissolution Apparatus » Wood Intrinsic Dissolution Apparatus

Wood Intrinsic Dissolution Apparatus

 Wood Intrinsic Dissolution Apparatus
Wood Intrinsic Dissolution Apparatus
Send Inquiry
Product Code : 280
Product Description

The Wood apparatus for intrinsic dissolution testing was originally developed by Dr. John Wood in 1963. The apparatus enables the calculation of the dissolution rate per centimeter squared of the intrinsic ingredients of pharmaceutical products. NATIONAL has brought its extensive experience in the manufacture of dies and presses for laboratory applications to bear to produce an improved version of the Wood intrinsic dissolution apparatus.

The NATIONAL version of the Wood apparatus, unlike the apparatus that has been available from other vendors, does not contain any hardened steel parts which quickly rust. All parts are made from either 316 stainless steel or a rust resistant high nickel content aerospace grade of steel which has been hardened to 58 Rockwell. The improved materials in the NATIONAL Wood Apparatus eliminate the need to oil the surface plate and the punch when not is use and to remove the oil prior to use. A hole in the head of the punch facilitates removal of the punch from the die by insertion of a small bar. After compressing the intrinsic sample to form the compact with a lab press (see NATIONAL Part No. 43212-8353), the die containing the compact is immersed in a dissolution medium.  The die has a male thread at the top which enables it to be attached to a female threaded holder (supplied) which is mounted on a laboratory stirring device and then immersed in the dissolution medium.

NATIONAL’s 2 Ton press with a special centering fixture properly aligns the surface plate of the Wood Apparatus in the press.

Part No.

Description

43212-8404

Wood apparatus, comprising 1 die, 1 punch (anvil), 1 surface plate and  1 holder. Available with either 4mm or 8mm diameter die. Please specify when ordering.

43212-8393 

2 Ton High Profile Press

43212-8408

Wood Apparatus base centering fixture, centers 4” x 4” surface plate of Wood apparatus in 2 ton High Profile E-Z Press™

43212-8353

2 Ton High Profile Press with 4” x 4” surface plate centering fixture for Wood Apparatus

43212-8410

Kit, with 2 Ton High Profile Press (43212-8393), base centering fixture (43212-8408), and Wood Apparatus (43212-8404). Specify either 4mm or 8mm die for Wood apparatus.


NATIONAL ANALYTICAL CORPORATION
X


Back to top
NATIONAL ANALYTICAL CORPORATION All Rights Reserved.