Filtration Products

Description : Vacuum desiccators remove air and moisture with the use of an in-house laboratory vacuum or vacuum pump and can be brought back to vacuum easily after opening. Vacuum desiccators can also be used for degassing techniques. Vacuum desiccators help stabilize and preserve samples so they can be analyzed. They remove moisture from all types of materials. We have a selection of vacuum desiccators in glass, polypropylene, or polycarbonate materials. Choose a vacuum desiccator based on its compatibility with the chemicals you will be using. Also look at the plate diameter, flange OD, inside diameter, total height, and clearance above the plate. Available Material : Polycarbonet , Stainless Steel , Borosilicate Glass

MicroVacc 1-B Filtration system is ideal for sample preparation in microbiological analysis achieving a trans membrane pressure of 300 mbar and a flow rate of 100 ml @ 10 Second (Water Sample ) Constant flow rates and a defined maximum vacuum smooth and reliable filtration Benefits Direct transfer ensures no handling of liquid waste & no Require Glass or Plastic Trap High-performance flow rate Noise reduction design 35db Compact Battery Operated (Save Bench Space) Maintenance-free technology

Dispensing pressure vessels are designed for dispensing fluids under pressure for filtration through any pressure-type filter holder. The portable vessels are available in 5, 10, and 20-liter and 1-gallon capacities. These ASME-UM code-complying vessels are compatible with ASME code-complying vent/relief valves.

Solid phase extraction vacuum manifolds allow to simultaneously processing up to 12 or up to 24 SPE tubes. Precise flow control is provided through each SPE tube by rotating the independent, Push-type valves in the cover, this ensures the packing will not dry out in some tubes while others finish draining. Features

MicroVacc Filtration system is ideal for sample preparation in microbiological analysis achieving a trans membrane pressure of 300 mbar and a flow rate of 100 ml @ 10 Second (Water Sample ) Constant flow rates and a defined maximum vacuum smooth and reliable filtration . Inbuilt Non Return Valve for individual Valve

MicroVacc Filtration system is ideal for sample preparation in microbiological analysis achieving a trans membrane pressure of 300 mbar and a flow rate of 100 ml @ 10 Second (Water Sample ) Constant flow rates and a defined maximum vacuum smooth and reliable filtration . Inbuilt Check Valve for individual Valve

MicroVacc 3-B Filtration system is ideal for sample preparation in microbiological analysis achieving a trans membrane pressure of 300 mbar and a flow rate of 100 ml @ 10 Second / Branch (Water Sample ) Constant flow rates and a defined maximum vacuum smooth and reliable filtration Benefits Direct transfer ensures no handling of liquid waste & no Require Glass or Plastic Trap High-performance flow rate Noise reduction design 35db Compact Battery Operated (Save Bench Space) Maintenance-free technology

Vacuum / Pressure Filtration Holders Seal membrane by hand tightening locking wing nuts Optimal holder design minimizes resistance and maximizes flow rate Each unit labeled with identifying serial numbers on the outside of both the inlet and outlet plates Applications Use in-line for filtering gases or liquids Use with pressure vessel for batch type operations