Cookie Img
National Analytical Corporation
Home » Products » ON-SITE TESTING FOR TOTAL CHLORINE IN USED OIL » CLOR-D-TECT® Q4000 Quantitative Chlorine Screening

CLOR-D-TECT® Q4000 Quantitative Chlorine Screening

CLOR-D-TECT® Q4000 Quantitative Chlorine Screening
CLOR-D-TECT® Q4000 Quantitative Chlorine Screening
Product Code : 495
Product Description
ASTM Method D-5384

USEPA SW-846 Method 9077

CLOR-D-TECT Q4000 under USEPA SW-846 Method 9077 quantifies the chlorine level of used oil between 200 - 4000 ppm. The kit has been proven invaluable when different oil lots are blended or when the user must know how close a quantity of waste oil is to the 1000 ppm or 4000 ppm action level. Clor-D-Tect Q4000 is a proven test to measure chlorine in crankcase, hydraulic, diesel and lubricating oils and virtually any hydrocarbon based solvent. The pocket-sized Clor-DTect Q4000 kit has all its premeasured reagents sealed in glass ampules for safe, consistent, and accurate results. The test is quick and easy to run, with results obtained in the field in less than 5 minutes with no special training. Clor-D-Tect Q4000 has been assigned ASTM Method D-5384 and USEPA SW-846 Method 9077.

Analytes Chlorine/Chlorinated Organics Matrix Used Oil, Solvents, Organic Liquids Detection Quantitative colorimetric titration Method Action Levels 200 - 4000 ppm MDL 200 ppm MQL 600 ppm Interferences Sulfur may cause false positive results.

Overall Accuracy 10% +/- MDL
Analysis Time Less than 5 minutes

NATIONAL ANALYTICAL CORPORATION
Other Products in 'ON-SITE TESTING FOR TOTAL CHLORINE IN USED OIL' category


Back to top
NATIONAL ANALYTICAL CORPORATION All Rights Reserved.