Cookie Img
National Analytical Corporation
Home » Products » Solid Sampling & KBr Presses » 12, 15 & 20 Ton Hydraulic Laboratory Presses

12, 15 & 20 Ton Hydraulic Laboratory Presses

12, 15 & 20 Ton Hydraulic Laboratory Presses
12, 15 & 20 Ton Hydraulic Laboratory Presses
Send Inquiry
Product Code : 289
Product Description

NATIONAL™s new patented Press hydraulic lab presses feature a unique lightweight ergonomic design. All Press laboratory press models weigh less than 90 pounds due to NATIONAL™s patented unibody construction. The 12 ton Press laboratory press weighs a mere 51 pounds! The 15 and 20 ton Press will handle a variety of lab applications, including pressing KBr pellets for FTIR spectroscopy and briquetting samples for XRF spectroscopy. Ports in the walls of the lab press frame allow access for vacuum lines and electrical cords to the area between the platens, which enables use of the press with evacuable dies and heated platens. The 15 and 20 ton Press can also be used for making thin films with NATIONAL™s Precision Thickness Film Maker and Heated Platens. Automated versions or our laboratory presses are available which are driven by pneumatic motors powered by your lab™s compressed air supply.

The newest additions to the Press laboratory press line are NATIONAL™s new 1 and 2 ton  Presses. The 1 and 2 ton units offer sensitivity at low pressure levels in applications where precise control of the load on the sample is required, such as pressing pellets of intrinsic pharmaceutical ingredients for dissolution rate analysis.

All Presses lab presses feature built in polycarbonate safety shields with solid brass hardware. There are die centering depressions in the round bottom platens. Each press comes with a standard stainless steel filling disc to flatten the platen. The bottom platen of the 2 and 12 ton Press automatically centers NATIONAL™s 13mm Macro-Micro die. The bottom platen of the 15 and 20 ton Press has a 4" diameter depression and optional donut shaped inserts are available to automatically center NATIONAL's 13mm, 20mm, 32mm, 35mm and 40mm die sets. Optional extra long handles are also available for all presses for extra leverage.


Features:

Built in Polycarbonate Safety Shields
Adjustable Overhead Lead Screw
Access Ports for Vacuum and Electrical Lines
Lightweight
Unibody Construction
 
Ergonomic Design
Automatic Die Centering

Part No.

Description

43212-5859

12 ton Press lab press, with safety shields, shipping weight approx. 57 pounds, CE marked

43212-7418

15 ton Press lab press, with safety shields, shipping weight approx. 90 pounds, CE marked

43212-6306

20 ton Press lab press, with safety shields, shipping weight approx. 90 pounds, CE marked

43212-6631

Film Maker Kit with 20 ton Press, Heated Platens & Temperature Controller (43212-6664) & Precision Thickness Film Maker (43212-4608)

43212-6632

KBr Pellet Kit with 13mm die set (43212-2477), 20 ton Press (43212-6306)

43212-5908

KBr Pellet Kit with 13mm die set (43212-2477) & 12 ton Press (43212-5859)

43212-2477

13mm KBr die set

43212-5223

20mm die set

43211-184

KBr SpectroGrade powder, 100 grams 

43212-6636

Die Centering Disc with 3.65" (92.7mm) aperture and 4" OD, centers NATIONAL 20-40mm die sets

43212-6637

Die Centering Disc with 2.15" (54.6mm) aperture and 4" OD, centers NATIONAL and Specac 13mm die sets and NATIONAL and Distek intrinsic dissolution die bases. Also centers any die or device with 2' to 2.10' base diameter

43212-6638

Die Centering Disc with 2.85" (72.3mm) aperture and 4" OD, centers Specac 20-35mm die sets

43212-6639

Extra long handle for extra leverage makes pumping easier


NATIONAL ANALYTICAL CORPORATION
X


Back to top
NATIONAL ANALYTICAL CORPORATION All Rights Reserved.